01543 263836

 

sales@starasafety.co.uk

Segre P2

Protects against solid and liquid particles of metal dust, fiberglass dust and powder polishing.

 

These masks have been approved by INSPEC, UK and they meet the European standard En 149:2001 for FFP2 masks. This means that the respirators protect you against solid particles and water-based non-volatile liquid particles. Moreover also they have passed the dolomite.

 

The nominal protection factor is 12 and the protection assigned is 10. Respirators can be used in concentrations not exceeding 12 times the occupational exposure limits.

 

The Segre P2 mask has been proved in the following aspects: filtration, flammability, resistance to breathing, internal filter, and a general assessment test in accordance with the European standard that included the exposure of 120mg test.

 

The valve reduces the temperature, the condensation and the humidity inside the masks. It also facilitates the exhalation of the worker and therefore the mask offers less resistance to breathe.

 

Download PDF

Segre P2 V

This mask is exactly the same as the model Segre P2 but it contains an exhalation valve.

 

The valve reduces the temperature, the condensation and the humidity inside the masks. It also facilitates the exhalation of the worker and therefore the mask offers less resistance to breathe.

 

Download PDF

Segre P2CV

This model has the same characteristics as the basic model Segre P2 but includes the benefits of the exhalation valve and activated carbon.

 

Activated carbon is used to purify the air and remove primarily oil vapors, odors and other hydrocarbons and compressed gases. The valve reduces the temperature, the condensation and the humidity inside the masks. It also facilitates the exhalation of the worker and therefore the mask offers less resistance to breathe.

 

Download PDF